|
|
|
|
165Kg
Tow-Behind ATV
Spreader |
Durable ground-drive
spreader designed for
daily use and smaller
loads. Built from high
quality materials,
designed to last. Easily
towed behind your ATV /
Quad Bike (350cc+),
Ride-on Mower (20HP+) or
Tractor (18HP+). |
|
Hitch |
50mm Tow
Ball |
Power
Source |
Self-Propelled, Ground Driven |
Hopper Capacity |
165 Kg |
Spreading Width |
3-7 Metres
(depending on material type) |
Seed
Gate |
Adjustable |
Spreading Capacity |
Up to 5
acres per hour |
Construction |
Bolt
together, powder coated steel |
Frame |
Tubular
Steel |
Direction Adjustment |
Yes |
|
|
1,120L
Ground-Drive Manure Spreader |
Durable ground-drive
spreader designed for daily use and smaller loads. Built
from high quality materials, designed to last. Featuring
fully welded 12-gauge steel body, heavy duty steel frame
and simple A-frame hitch. Easily towed behind your
tractor, ATV or ute. This spreader is great for use with
manure from sheep and cows. Can also be used to spread
fertilizer, salt, organic manure and so on.
The ratchet-clutch drive system moves the conveyor chain
along in consistent, small increments, while the
chain-driven spinner ensures a constant spray of
material at the rear. |
|
Hitch |
Drop-Pin
Hitch |
Drive
System |
Ground-driven (tow behind) |
Hopper Capacity |
1,120
litres |
Body
Construction |
12 Gauge
Steel |
Overall
Measurements |
3,765mm
(L) x 1,180mm (W) x 805mm (H) |
Box
Measurements |
2,565mm (L) x 715mm (W) x 425mm (H) |
Unit
Weight |
300Kg |
Opening
Width |
925mm |
Tyres |
6x12
All-Terrain Tractor Tyres |
Conveyor Chain |
Cadmium
Plated Conveyor Chain |
Jockey
Wheel |
Foldable
Jockey Wheel |
|
⚠
|
CAUTION: This spreader is
designed for use with relatively
dry, rotted, loose manure only.
The use of fresh or wet manure can
cause undesired operation and damage
to the spreader, this is not covered
by warranty. |
|
|
450Kg Stainless Steel
Fertilizer Spreader |
Spreads grass seed, wheat,
fertilizer and more. Durable 304 grade stainless steel
hopper holds up to 500 litres (450KG). Stainless steel
flow gate and adjustable spinner fins for smooth flow
and controlled pattern, discharge up to 3 tonnes per
hour. The pre-mounted 2.5 metre control cable can also be
connected to tractor
for easy flow gate control. Heavy duty gearbox and PTO
drive-line. Durable box-section powder-coated steel
frame. |
|
Hitch |
Cat 1, 3 Point Linkage |
Tractor Power Required |
24HP and
up |
Hopper Capacity |
500 litres
(450KG Max.) |
Spinner |
304 Grade
stainless steel |
Seed Gate |
Adjustable |
Reversible Spinner |
Yes, Left / Right |
Frame |
Tubular Steel |
Hopper |
304 Grade
stainless steel |
PTO Shaft
Included |
Yes |
PTO Input Speed |
540 RPM |
Spreading Width |
5-16
metres spreading width |
|
|
1,000Kg Stainless Steel
Fertilizer Spreader |
Spreads grass seed, wheat,
fertilizer and more. Durable 304 grade stainless steel
hopper holds up to 820 litres (1,000KG). Stainless steel
flow gate and adjustable spinner fins for smooth flow
and controlled pattern, discharge up to 3 tonnes per
hour. The pre-mounted control cable can also be
connected to tractor
for easy flow gate control. Heavy duty gearboxes and PTO
drive-line. Durable box-section powder-coated steel
frame. |
|
Hitch |
Cat 1, 3 Point Linkage |
Tractor Power Required |
70HP and
up |
Hopper Capacity |
820
litres (1,000KG Max.) |
Spinners |
304 Grade
stainless steel |
Seed Gate |
Adjustable |
Frame |
Fully
Welded
Steel |
Hopper |
304 Grade
stainless steel |
PTO Shaft
Included |
Yes |
PTO Input Speed |
540 RPM |
Spreading Width |
Up to 10
metres spreading width |
|
|
|
1,000Kg Stainless Steel Manure Spreader |
Designed to spread a full
range of materials available to all facets of farming,
from the lightest granulates, powders and manures to the
heavier gypsum and lime, this spreader will convey
material of any texture from micro fine particles to
crushed stones.
Effectively spreads lime, super, urea, gypsum, seeds,
dolomite, map, dap, cotton trash, crusher dust, chicken
litter, pig and cow manure. |
|
Hitch |
Cat 1, 3 Point Linkage |
Tractor Power Required |
70HP and
up |
Hopper Capacity |
820 litres
(1,000KG Max.) |
Spinner |
304 Grade
stainless steel |
Seed Gate |
Adjustable |
Conveyor |
Steel
conveyor chain |
Frame |
Fully
Welded
Steel |
Hopper |
304 Grade
stainless steel |
PTO Shaft
Included |
Yes |
PTO Input Speed |
540 RPM |
Spreading Width |
Up to 10
metres spreading width |
|
⚠
|
CAUTION: This spreader is
designed for use with relatively
dry, rotted, loose manure only.
The use of fresh or wet manure can
cause undesired operation and damage
to the spreader, this is not covered
by warranty. |
|
|
3,000Kg Multipurpose Spreader |
Ideal for fertilizer,
manure, feed, lime, etc
Designed to spread a full range of materials available
to all facets of farming, from the lightest granulates,
powders and manures to the heavier gypsum and lime, this
spreader will convey material of any texture from micro
fine particles to crushed stones. Effectively spreads
lime, super, urea, gypsum, seeds, dolomite, cotton trash, crusher dust, chicken litter, pig and cow
manure. |
|
Hitch |
Drop Pin |
Tractor Power Required |
60HP and
up |
Hopper Capacity |
3,000 Kg |
Spinners |
Twin
Spinners, Painted Steel |
Seed Gate |
Adjustable |
Tyres |
11.5/80-15.3 Heavy Duty Tyres |
Conveyor |
Variable
speed hydraulic driven steel conveyor
chain |
PTO Shaft
Included |
Yes |
PTO
Input Speed |
540 RPM |
Spreading Width |
6 - 15
Metre effective spreading width |
Discharge Aperture |
15mm-270mm
Discharge Adjustment |
Jack
Stand |
Sidewinder
jack stand |
Hydraulics |
Fully self
contained hydraulic drive system |
Hydraulic Oil Capacity |
60L
(Approx.) |
Overall
Measurements |
Length:
4,200mm
Width:
1,800mm
Height:
1,950mm |
Hopper Maximum Measurements |
Length:
2,680mm
Width:
1,500mm |
Drawbar
Length |
900mm |
Machine Empty Weight |
1,200kg |
|
|
5,000Kg Multipurpose Spreader |
Ideal for fertilizer,
manure, feed, lime, etc
Designed to spread a full range of materials available
to all facets of farming, from the lightest granulates,
powders and manures to the heavier gypsum and lime, this
spreader will convey material of any texture from micro
fine particles to crushed stones. Effectively spreads
lime, super, urea, gypsum, seeds, dolomite, cotton trash, crusher dust, chicken litter, pig and cow
manure. |
|
Hitch |
Drop Pin |
Tractor Power Required |
80HP and
up |
Hopper Capacity |
5,000 Kg |
Spinners |
Twin
Spinners, Painted Steel |
Seed Gate |
Adjustable |
Tyres |
15/70-18 Heavy Duty Tyres |
Conveyor |
Variable
speed hydraulic driven steel conveyor
chain |
Oil
Cooler |
12 volt
hydraulic oil cooler |
PTO Shaft
Included |
Yes |
PTO
Input Speed |
540 RPM |
Spreading Width |
6 - 15
Metre effective spreading width |
Discharge Aperture |
40mm-290mm
Discharge Adjustment |
Jack
Stand |
Sidewinder
jack stand |
Hydraulics |
Fully self
contained hydraulic drive system |
Hydraulic Oil Capacity |
80L
(Approx.) |
Overall
Measurements |
Length:
4,500mm
Width:
2,300mm
Height:
2,250mm |
Hopper Max. Measurements |
Length:
3,070mm
Width:
1,810mm |
Drawbar
Length |
1,230mm |
Machine Empty Weight |
1,520kg |
|
|
8,000Kg
Multipurpose Spreader |
Ideal for fertilizer,
manure, feed, lime, etc
Designed to spread a full range of materials available
to all facets of farming, from the lightest granulates,
powders and manures to the heavier gypsum and lime, this
spreader will convey material of any texture from micro
fine particles to crushed stones. Effectively spreads
lime, super, urea, gypsum, seeds, dolomite, cotton trash, crusher dust, chicken litter, pig and cow
manure. |
|
Hitch |
Drop Pin |
Tractor Power Required |
100HP and
up |
Hopper Capacity |
8,000 Kg |
Spinners |
Twin
Spinners, Painted Steel |
Seed Gate |
Adjustable |
Tyres |
16/70-20
Heavy Duty Tyres |
Conveyor |
Variable
speed hydraulic driven steel conveyor
chain |
Oil
Cooler |
12 volt
hydraulic oil cooler |
PTO Shaft
Included |
Yes |
PTO
Input Speed |
540 RPM |
Spreading Width |
6 - 15
Metre effective spreading width |
Discharge Aperture |
10mm-400mm
Discharge Adjustment |
Jack
Stand |
Sidewinder
jack stand |
Hydraulics |
Fully self
contained hydraulic drive system |
Hydraulic Oil Capacity |
100L
(Approx.) |
Overall
Measurements |
Length:
5,550mm
Width:
2,400mm
Height:
2,170mm |
Hopper Max. Measurements |
Length:
4,000mm
Width:
2,140mm |
Drawbar
Length |
1,180mm |
Machine Empty Weight |
2,100kg |
|
|
|
|
|