|
|
|
|
6 Inch PTO Friction
Clutch |
Friction clutches are
typical torque limiting
devices that use
friction as a means to
limit the amount of
torque that can be
delivered to your
implement. These
clutches use one of two
types of springs,
pigtail or flat (belleville).
Historically, a friction
clutch is a simple,
reliable method of
protecting equipment.
But be warned. The
torque setting of any
"friction" device
changes as the discs and
related parts wear.
Factory settings are
only good at the
factory. PTO Clutches
are excellent for
mowers, slashers, post
hole borers, rotary
cultivators, rotary
cutters, combine
headers, grain carts,
tillers, trenchers,
balers, fans, forage
harvesters, etc. |
|
Hitch |
PTO |
Construction |
Steel |
Tractor Power Required |
Up to 60HP |
PTO Speed |
540 RPM |
Spline Type |
F35 Square, 6 teeth |
Spline (Female) |
1
3/8" (35mm) |
Spline (Male) |
1
3/8"
(35mm) |
Plate Diameter |
6 inches (165mm) |
Maximum Torque |
1,000 Nm |
|
|
8 Inch PTO Friction
Clutch |
Friction clutches are
typical torque limiting
devices that use
friction as a means to
limit the amount of
torque that can be
delivered to your
implement. These
clutches use one of two
types of springs,
pigtail or flat (belleville).
Historically, a friction
clutch is a simple,
reliable method of
protecting equipment.
But be warned. The
torque setting of any
"friction" device
changes as the discs and
related parts wear.
Factory settings are
only good at the
factory. PTO Clutches
are excellent for
mowers, slashers, post
hole borers, rotary
cultivators, rotary
cutters, combine
headers, grain carts,
tillers, trenchers,
balers, fans, forage
harvesters, etc. |
|
Hitch |
PTO |
Construction |
Steel |
Tractor Power Required |
Up to 60HP |
PTO Speed |
540 RPM |
Spline Type |
F35 Square, 6 teeth |
Spline (Female) |
1
3/8" (35mm) |
Spline (Male) |
1
3/8"
(35mm) |
Plate Diameter |
8 inches (200mm) |
Maximum Torque |
1,000 Nm |
|
|
1,200mm
PTO
Shaft |
Featuring solid
universal joints made
from hardened steel,
these PTO shafts are
designed for durability
and strength, making
them suitable for use
with various types of
agricultural machinery.
Tractor End: 1-3/8"
(34.9mm) x 6 spline;
Implement End: 1-3/8"
(34.9mm) x 6 spline.
This design ensures
compatibility with
similar-sized tools and
tractors, providing
exceptional transmission
power for your
equipment. The inclusion
of a safety chain and
plastic shield mitigates
potential hazards during
the transmission
process. |
*Picture not to scale |
|
Shaft
Type |
Telescopic |
Length
(Closed) |
1,200mm |
Spline Type |
F35 Square, 6 teeth |
Spline
Size |
1
3/8"
(35mm) |
Protective Shield |
Yes |
Shaft
Tube |
Triangular
Tube |
Security Chain |
Yes |
|
|
|
|
|